Testimonials - Clutch Grab

Print Page | Close Window

Clutch Grab

Printed From: Brock's Performance
Category: Testimonials
Forum Name: Testimonials
Forum Description: Brocks Performance Customers Speak Out
URL: https://forums.brocksperformance.com/forum_posts.asp?TID=2507
Printed Date: March/26/2025 at 4:37pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Clutch Grab

Posted By: moreau
Subject: Clutch Grab
Date Posted: May/13/2015 at 7:59pm

hello guys
can anyone help me i have a really big clutch grab problem
bought a whole new clutch
and clutch basket
problem is still there
can,t launch it because its on or off
its a cbr1000rr 09
it was gone when i put a steel first and left the judder spring and washer out . it only helped 1 time '
its back

-------------
AP

Replies:

Posted By: *EJ*
Date Posted: May/14/2015 at 5:02pm

moreau,

We do not carry any clutch components for that bike so we have not worked on the CBR1000RR.
Install steels and fibers correctly, a service manual is a good tool to use, do not soak fibers in oil just get a thin coat of oil on fibers before install.

Posted By: moreau
Date Posted: May/14/2015 at 9:50pm

Hi EJ
I have a manual and doing it by the book
Not soaking the fibers just adding a thin coat
Had this problem from the start
Can,t launch clean
Thanks for your reply

-------------
AP

Posted By: BKnight
Date Posted: May/20/2015 at 11:52am

Moreau,

It sounds like your bike is equipped from the factory with a slipper clutch. Basically it allows the clutch to slip under high load applications (launching hard from dead stop or aggressively down shifting). Unfortunately we do not have a clutch mod for this bike and I'm not sure if anyone does. But that sounds like the root of your problem.

Good Luck

Posted By: moreau
Date Posted: May/20/2015 at 1:30pm

ok I know that the slipper clutch has something to do with this .
but my buddy has the exact same bike
no grab
he has a slipper also
no grab
10000 rpm launch smoothhh

-------------
AP