Muzzy h/pressure shifter install - Event Date: January/01/1900 - January/01/1900

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   On the install of the F/I wires (the red/white & the white red of the digi-kill box) to the yeoow/red manin harness. It states no other load on this on the wire. I have a power commander which has it's own dual red wires on that circuit.  What to do with the power commander wires is the question? Travis I know you've done this e-mail me and I'll give you my number, maybe I'll just pay you for your time to help me with this. RACETRANS@AOL.COM
Everything else is hooked up, just not sure about the F/I wiring. I'm in the Sparrows Point/Dundalk area.
                                           Rick

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
04limited Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: July/28/2004 Location: United States Status: Offline Points: 47	Post Options Post Reply Quote 04limited Report Post Thanks(0) Quote Reply Calendar Event: Muzzy h/pressure shifter install Posted: March/20/2005 at 1:12pm
	On the install of the F/I wires (the red/white & the white red of the digi-kill box) to the yeoow/red manin harness. It states no other load on this on the wire. I have a power commander which has it's own dual red wires on that circuit. What to do with the power commander wires is the question? Travis I know you've done this e-mail me and I'll give you my number, maybe I'll just pay you for your time to help me with this. RACETRANS@AOL.COM Everything else is hooked up, just not sure about the F/I wiring. I'm in the Sparrows Point/Dundalk area. Rick

04limited Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: July/28/2004 Location: United States Status: Offline Points: 47	Post Options Post Reply Quote 04limited Report Post Thanks(0) Quote Reply Posted: March/30/2005 at 12:22pm
	OK Folks, Here's the deal if you have a PC you need to connect the Digi-kill wires after the PC single red wire meets the factory harness. This is the area where the PC reconnects to the factory harness before the injectors. The single red PC wire is the FI power in wire and the factory Yellow/red would than be the FI feed wire. If you hook the Digi-kill before the PC, the dual red wire, every time you activate the shift the whole system turns off. The bike shuts down and you need to crank to start again. Hope this helps out. Rick