|
streetsmart system - Event Date: January/01/1900 - January/01/1900 |
Post Reply 
|
| Author | |
fstbusa 
Senior Member 
Joined: September/22/2003 Location: United States Status: Offline Points: 97 |
 Post Options
 Thanks(0)
 Quote Reply
 Calendar Event: streetsmart systemPosted: December/16/2003 at 9:57pm |
|
I had a few problems fitting the system together. I think the end of the header pipe was slightly damaged. I did fix it with a pliers. The midpipe wouldn't fit into the header very well. Also the midpipe didn't fit in the canister at all. I had the ever so slightly bend the edges in to get it started in the can. I've installed exhausts on cars before and this was a minor job compared to that. So I wasn't upset in the least bit. Other than that its going together nicely!!! I still have to finish putting the bike back together. |
|
|
03 40th Ann. Ghetto Busa
|
|
 |
|
|
HayabusaEPT
Senior Member
Joined: December/07/2003 Status: Offline Points: 18 |
Post Options
Thanks(0)
Quote Reply
Posted: December/17/2003 at 2:23am |
|
Took me awhile to put my exhaust on. Did it myself. Have never done any work to my bike like this before. Once I had my old system off, took me about 2 hours to put everything back together. Not bad. had no problems fitting pieces together though. WD-40 helped alot......
|
|
|
|
|
Brock
Admin Group 
Joined: October/01/2003 Location: Dayton, OH Status: Offline Points: 232 |
Post Options
Thanks(0)
Quote Reply
Posted: December/17/2003 at 8:25am |
|
These ARE hand built systems.... The pre-assembly usually catches any minor fitting flaws off of the bike... which usually speeds up the actual assembly on the bike. I hope it wasn't too frustrating! If you believe anything could be fabricated incorrectly on the system, please call! We attack problems of this nature with vigor....at no additional cost to you ...while trying to minimize further hassle. Brock 937-298-6818
|
|
|
|
|
fstbusa
Senior Member
Joined: September/22/2003 Location: United States Status: Offline Points: 97 |
Post Options
Thanks(0)
Quote Reply
Posted: December/17/2003 at 10:19pm |
|
no I wan't too frustrated and I know how exhaust systems are supposed to fit and it was expected. I really enjoy the look of this exhaust and am sure the performance will out weigh as problems I had installing this beast!!!
thx for the great product!! |
|
|
03 40th Ann. Ghetto Busa
|
|
|
|
|
crazytrainbusa
Senior Member
Joined: October/28/2003 Status: Offline Points: 33 |
Post Options
Thanks(0)
Quote Reply
Posted: December/18/2003 at 8:17pm |
|
Just wait til you fire that bad boy off for the first time with the Brock Hindle installed. You'll think the angels are singin' to ya in yer garage! I can't wait to see your post here after you get it buttoned up and fire 'er off. Hehehehe... What's even more impressive is when you roll hard on it after the install. Careful because the added power makes it even easier to loft the front wheel! Not that this is always a bad thing. |
|
|
- 'Train
|
|
|
|
|
fstbusa
Senior Member
Joined: September/22/2003 Location: United States Status: Offline Points: 97 |
Post Options
Thanks(0)
Quote Reply
Posted: December/18/2003 at 8:42pm |
|
I can't wait!!! Unfortunately I have to wait a few months for all the snow to melt before I can take er for a spin....
|
|
|
03 40th Ann. Ghetto Busa
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
