CBR1000RR (2008-09): CT Single Exhaust System: USB: Street and Track Map

TO DOWNLOAD MAP CLICK THE LINK BELOW

http://www.brocksperformance.com/mapsupport/Honda_CBR/BPP-H1008-CTS-STREET_TRACK_MAP1.zip

Caution: DO NOT ATTEMPT TO OPEN ANY MAP unless the PC3usb program has been installed on your computer from the CD supplied with your PC3usb unit. This program, in addition to a complete users guide, is also available from downloads page of http://www.powercommander.com/powercommander/Downloads/Default.aspx

Attention: MAP SHARING IS **NOT PERMITTED**----Anyone suspected of sharing Brock’s Performance Maps (or modified versions of original Brock maps) will be TERMINATED from the Map Support, Technical Support and Discounted Additional Purchase Programs! See notes below.

Subject: CBR1000RR (2008-09): CT Single Exhaust System: USB: Street and Track Map

This street and track map is for use in 2008-09 Honda CBR1000RR’s with a stock engine using Brock's Performance  CT Single Exhaust System.

Dynojet IRC-1 or Bazzaz Z-Bomb installed.

See map notes for specific details. 

Good Luck and GO FAST!

Brock

----------------------------------------------------------------------------------------------------------------

Check the owners group for more information:

http://www.brocksperformance.com/forum/display_forum_topics.asp?ForumID=11

------------------------------------------------------------------------------------------------  

**** DO NOT ATTEMPT TO OPEN THESE MAPS!!!! *****

(DO NOT double click and open the attachments, the file can become CORRUPT and USELESS. If this happens, you must contact mapsupport@brockracing.com for a replacement map.)

PLEASE FOLLOW THE INSTRUCTIONS BELOW.

Attached is a PC3USB map for your CBR.

DO NOT DISTRIBUTE.....this map is property of Brock Davidson Enterprises, Inc.

Brock’s Performance will supply maps to approved customers on an individual basis.

DO NOT SHARE THIS MAP! We have worked hundreds of hours and spent countless dollars to perfect our mapping.....we cannot afford to have it provided to non-customers. (There is also a VERY good chance that one of our maps will be used to out run YOU if they are provided to others!)

This map was configured according to our notes for your application.

FYI: if you purchased your Power Commander directly from Brock’s Performance Products, there will be a HAND WRITTEN tag on the back of the unit indicating the correct map has already been loaded and verified. If the tag is missing, we did not have enough information to load the correct map. Proceed to Step 1.

Thanks and good luck,

Brock

-------------------------------------------------------------------------------

Special Note:

DO NOT ATTEMPT TO READ THIS MAP UNLESS YOU ARE IN THE POWER COMMANDER 3 USB PROGRAM!

FOLLOW THESE STEPS TO PROPERLY INSTALL THE MAP:

Step 1: Save the attached map file to your Desktop.

Double left click on the attachment marker with “BPP-XXX” .djm in this e-mail. 

A screen will appear asking if you would like to open the file or save it to disk:

Left click on save to disk.

Left click ok.

Left click on the arrow pointing down (at the top of the screen) marked: Save in

Left click: Desktop

----------------------------------------------------------------------------------------------------------------------------

Step 2: Send map from your Desktop to your PC3USB Power Commander.

Double left click on the PC3USB icon on you desk top (or start menu.)

(If you do not have this icon, you must install the USB program from the CD-ROM supplied with your PC3USB.)

Select Open Map File.

Look in Desktop (click the down arrow to choose Desktop from the drop down menu)

Double Left click: “BPP-XXX” .djm

Attach the MICRO USB cable from your computer to the PC3USB Power Commander.

Turn the key on with the bike in neutral….START THE BIKE.

SPECIAL NOTE: The PC3USB map can be loaded into the Power Commander OFF of the bike by using the 9 volt connector supplied with Power Commander if this is more convenient. Simply install the unit on the machine after the steps below are followed.

Select Send Map.

**Watch the bottom of the PC3 USB screen to be sure the map is loading correctly….or select ok if the map loaded screen appears**

If your map loads correctly…you are finished.

If you wish to reload your map from the floppy disk supplied by Brock’s Performance with your Exhaust System purchase, follow the steps above. You must substitute 3 ½ floppy (A :) for Desktop

If the program does not load, your ports may not be configured properly.

Contact Dynojet or the tutorial on your PC3USB CD ROM.

Good Luck and GO FAST!

Brock