Brock's Performance Forum : Low Dyno numbers for 09 ZX-14 https://forums.brocksperformance.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Mon, 05 Oct 2026 14:32:26 +0000 Mon, 01 Jul 2013 10:55:00 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.01 360 https://forums.brocksperformance.com/RSS_post_feed.asp?TID=2426 <![CDATA[Brock's Performance Forum]]> https://forums.brocksperformance.com/forum_images/web_wiz_forums_black.png https://forums.brocksperformance.com/ <![CDATA[Low Dyno numbers for 09 ZX-14 : Hey Don,The first thing you need...]]> https://forums.brocksperformance.com/forum_posts.asp?TID=2426&PID=10155&title=low-dyno-numbers-for-09-zx14#10155 Author: Brock
Subject: 2426
Posted: July/01/2013 at 10:55am

Hey Don,

The first thing you need to do is go to our private ZX-14 section and read about your bike: https://www.brocksperformance.com/forum/forum_posts.asp?TID=700 

There is one thing in particular that you mention above that stands out as a real power killer. Dyno results are about DETAILS and preparation.

The link above with direct you here: https://www.brocksperformance.com/forum/forum_posts.asp?TID=13

The Busa's and 14's act the same on the dyno and this is where the real details are found.

The good news is that there is nothing wrong with your bike, and certainly nothing wrong with your pipe (:

Having your bike ready to make killer numbers takes a little work in advance... but having a few items wrong to kill power is the EASIEST THING IN THE WORLD.

Give my staff a call if you have any more questions 937-912-0054

Brock

ps. go here and scroll down to our diaries also: http://www.brocksperformance.com/brocknm/feature_articles.aspx

They give you an idea of what we start with stock, compared to where we end up. Your CT duals make more power than the Street Meg we used back in 07. But if ALL of the details in the story aren't followed... ALL of the results won't be noticed either.
]]> Mon, 01 Jul 2013 10:55:00 +0000 https://forums.brocksperformance.com/forum_posts.asp?TID=2426&PID=10155&title=low-dyno-numbers-for-09-zx14#10155 <![CDATA[Low Dyno numbers for 09 ZX-14 : Brock I had my bike Dyno&#039;d...]]> https://forums.brocksperformance.com/forum_posts.asp?TID=2426&PID=10154&title=low-dyno-numbers-for-09-zx14#10154 Author: mrzx142009
Subject: 2426
Posted: June/29/2013 at 11:50pm

Brock I had my bike Dyno'd today @ Marrs Performance in Fayetteville, TN. Dan Marrs the owner conducted the Dyno. My bike is a 2009 ZX-14 SE  stock motor with CT Duals K&N Filter, GiPRO ATRE (HealTech), 16/43 Gearing, Pair valve removed, PCV W/Brock street map, files In and 89 pump gas.  My bike dyno'd 170.65HP / 96.88 Torque on a Dynojet set to STD Smoothing  he made 5 passes all in 4th gear.  I was looking for something around in the 180's HP range since on  your site you have a 06 zx-14 making 187hp / 110 torque. That was my primary reason for going with with the CT series exhaust.
 
Now the only difference I see between the bike you dyno'd,  is it's a 06 and the flies have been removed. I can post the actual dyno sheet if needed.  Dan say's  if you have any question to please give him a call @ 931 433-9008. I hope I can get a few my HP out of my bike with your assistance.
 
Thanks Don Bankhead
 
 
]]> Sat, 29 Jun 2013 23:50:48 +0000 https://forums.brocksperformance.com/forum_posts.asp?TID=2426&PID=10154&title=low-dyno-numbers-for-09-zx14#10154